Ningbo Lingkai Electric Power Equipment Co., Ltd.
Professional Overhead Line Stringing Manufacturer; Undergroud Cable Pulling Tools Supplier.
Add to Cart
CWC-150 Hydraulic Busbar Processing Machine,Hydraulic Busbar Cutting Tools
Technical Data
Hydraulic Busbar Processing Machine,Hydraulic Busbar Cutting Tools
| Product No. | Model Type | Output (KN) | Operating stroke(mm) | Cutting Rangemm(mm) | Weight(kg) |
| 80109 | CWC-150 | 230 | 50 | ≤150*12 | 20 |
| 80110 | CWC-200 | 270 | 70 | ≤200*12 | 27 |
Hydraulic Bus bar Cutting Tools for Metal Sheet Cutting Up to 12mm is a remote control tools, works with an external hydraulic pump (capable of providing 700Bar working pressure). CWC-200 is intended to be used to cut Cu/Al busbar, it's cutting capacity is 200mm*12mm (Width*Thickness). With the help of hydraulic power and sharp cutting blade, quick and clean cutting can be achieved. Cutting surface is smooth, without burr.
This Busbar punching machine is suitable for pingching holes on Land H shape iron plate, copper and aluminum busbars, its punch dies made of high carbon tungesten steel and not easy to towear off. In all this busbar cutter is easy to carry and simple operate.
Characteristic:
CWC-150 Hydraulic Busbar Processing Machine,Hydraulic Busbar Cutting Tools
The unilateral type structure, cutting in larger power, but it does not waste materials.
The blade adopts alloy tool steel forging fine grinding, the incision is neat, no burr and no deformation.
During cutting, the copper and aluminum row should not be fixed, any position is OK.
The pressing device is equipped with the blade side in order to prevent the tilt of copper and aluminum row.
It can use with pump CFP-800-1,CP-700,EHP-70ZS,EHP--63A.