Ningbo Lingkai Electric Power Equipment Co., Ltd.
Professional Overhead Line Stringing Manufacturer; Undergroud Cable Pulling Tools Supplier.
Add to Cart
OPGW Construction Mesh Cable Sock Grips Single Thimble Cable Mesh Sock Grip
Cable Mesh Sock Grip Technical Data
OPGW Site Optical Fiber Cable Tools Construction Mesh For Telecom Cable
| Item number | Model | Applicable groud wire diameter(mm) | Load(kN) | |
| 17141 | 17141s | SLE(S)-1 | 7-11 | 10 |
| 17142 | 17142s | SLE(S)-1.5 | 11-15 | 15 |
| 17143 | 17143s | SLE(S)-2 | 15-18 | 20 |
| 17144 | 17144s | SLE(S)-2.5 | 18-22 | 25 |
OPGW Construction Mecsh Cable Sock Grips Application
This mesh cable gripper is used for the construction of APGW and ADSS,ADSS means all-dielectric self-suppoting optical fiber cable, OPGW refers to the optical power ground wire.
Operation Method:
OPGW Construction Mesh Cable Sock Grips Single Thimble Cable Mesh Sock Grip
1. Start the lacing from the eye end or anchoring end of the cable grip.
2.Thread the lace from through the first two loops of the split and pull.
3. Don not pull the lace too tight at this stage, leave a space between adjoin-ing loop roughly equal to the width.
4. As you continue the length, pull the open side of the grip, as wide apart as required.
5. Try to achieve an even and net lace-up as this assists with the strength of the grip when pulling.
6. Finally tie the end of the lace, once or twice round the end of the grip, twisting the end together securely, Excess lace can be cut off.
Wire rope cable grip for following outdoor cable;
1, Telecom cable
2, Fiber cable
3,Coaxial cable
4, Feeder cable
5, Hybrid cable
6, Corrugated cable
7, Smooth cable
8, Braid cable
Optical Fiber Cable Stringing Equipment: